Good Offer BP Mods Lightsaber Pod Mod Kit at £34.99！
Vapesourcing UK 
BP MODS Lightsaber X Pod Mod Kit 60W
The new BP Mods Lightsaber Pod Mod Kit, comes in two versions – standard 2200 mAh and compact 1500 mAh.
The pod-mod comes with a small zinc case with a comfortable fitted silhouette and a decorative woodgrain insert.
There are four colours to choose from with different panels and shades of the metal frame. A polymer cartridge with a twisted faceted cap and two different drip-types for different types of airflow, MTL & DTL.
The base was belted with a knurled air ring. A control panel was placed under the connector, consisting of a small display and two adjustment keys. The activation button and the USB port are installed on the opposite side.
The device can operate in wattage, voltages, or Bypass modes. The maximum output power will be 60 or 40 watts, depending on the version of the kit.
The integrated battery will have a stock of 2100 or 1500 mAh. Charging is carried out via USB Type-C with a current of 2A. The shock-resistant polymer reservoir will hold 2ml of E-Liquid.
The cartridge comes with four different coils from the TMD series. In addition, replacement landing rings and a standard 510 connector will be available separately.
It is also compatible with PnP VM/TM/TR/RBA Coil and GTX Below 0.6Ω Coil/RBA Coil. Please note that it is Not fit for PnP R/M Coil and GTX Above 0.6Ω Coil.
Size -113 by 27 mm (Model L)
Size -96 by 27 mm (Model S)
Built-in 2200 mAh battery (Model L)
Built-in 1500 mAh battery (Model S)
Charging current 2A
Maximum power -60 Watts (Model L)
Maximum power -40 Watts (Model s)
Tank volume -2 ml
BP Mods Lightsaber Contains
1x Lightsaber Mod
1x Pod Tank
1x TMD Pro Series of 0.55Ohm and 1.05Ohm
1x TMD Mesh Series of 0.3Ohm and 0.8Ohm
1x MTL Drip Tip
1x DL Drip Tip
1x USB-C cable
1x Orings & Silicon Plug
1x User Manual
more deal at: vape deal
