Table of Contents
Introduction
Dovpo has been a heated discussion for the successful releases of the Blotto RTA and the Topside Squonker. The Odin 100 is one of their latest powerful box mod. Compatible with a single 18650/20700/21700 battery, it features an output range between 1-100W. Equipped with a proprietary Chipset, the Odin 100 maintains stable performance and delivers delicious fine-tuned vapour. If you are looking for a new mech that packs a punch, keep reading for a full breakdown of the DOVPO Odin 100.
Product Info
Feature
VW Mode/ TCR Mode/ Bypass Mode
Aluminium & Zinc Alloy Chassis Construction
Intuitive Firing Button
0.96″ TFT Display Screen
Short-Circuit Protection
Overheat/Overtime Protection
Author: My Vape Review
Specification
Dimensions: 90.5mm by 36.3mm by 32mm
Battery: Single high-amp 18650 / 20700 / 21700 (not included)
Wattage Output Range: 1-100W
Voltage Output Range: 3.2-4.2V
Resistance Range: 0.06-3.5ohms
Author: My Vape Review
Package Content
1x ODIN 100W Box Mod
1x 18650 Battery Adapter
1x USB Cable
1x User Manual
1x Battery Warning Card
1x Social Media Card
1x QC Certificate
6x Battery Wraps
Author: My Vape Review
Build Quality and Design
The Dovpo Odin 100 looks really nice. It comes with a compact size of 90.5mm by 36.3mm by 32mm. The body is made of durable aluminium and zinc alloy that feels lovely to hold in the hand. On the top is a gold plated spring loaded pin and a stainless steel 510 plate, which will hold atomizers up to 28mm in diameter without overhang.
The front of the mod, the Odin 100 has three rectangle buttons, which are made of hard plastic. Among them, two for adjustment and the middle is for the menu system. Above the buttons, there is an 0.96inch TFT screen, which is easy to read and clearly shows everything you would expect to see, such as wattage, battery and resistance.
The Odin 100 features a set of six cut-outs on both sides of the body. You can see the battery through these cut-outs. The branding “Odin” has been stamped on one side of the body. At the bottom, there is a hinged battery door with some safety information and a unique serial number.
Functions and Features
The Dovpo Odin 100 is powered by a highly advanced Dovpo Chipset and supports variable wattage, bypass mode and TCR mode. To provide a stable vaping experience, the Odin 100 also has various safety features, such as short-circuit protection, overtime protection, overheat protection, high-temperature protection, low voltage protection and no-load protection.
As to the options in the menu, you can press the + or – button to quickly select options of POWER – BYPASS – TEMP – NI – TEMP – TI – TEMP – SS – TCR – PUFFS – BRIGHT – EXIT.
- Under TCR: set temperature
- Under BYPASS: battery voltage
- Under TEMP-NI/TI/SS: set temperature
- Under PUFFS is the current vaping times.
- Under POWER: the wattage set under POWER
- Press RESET to clear the vaping times
- BRIGHT: brightness adjustment
Performance
I tested this box mod with a 25mm tank and 0.18ohm coil. I was impressed by the stable power from the atomizer. It was a warm and rich vape, offering more-intense wattages. I installed a 21700 battery on the Odin 100, the battery life was incredible top-notch, giving 5 hours of stable use at around 100 watts. If you would like to use a 18650 battery, you need to use a battery adapter.
Verdict
The Dovpo Odin 100 looks good and is very comfortable to hold. It comes with top-notch construction and able to use atomizers of up to 28mm is a very nice option to have. The 100W output limit and a single 21700 battery can give you an all-day vape without swapping batteries. It is very simple to use and navigate.
If you are looking for a single battery box mod, the Odin 100 is a great choice. What do you think of the Dovpo Odin 100? Leave a comment below.
